Installing The Battery Refresher; Using The Battery Refresher; Maintaining And Cleaning The Battery Refresher; Warranty - Dometic WAECO PerfectBattery BR12 Instrucciones De Montaje

PerfectBattery BR12, BR24
6

Installing the Battery Refresher

➤ Attach the Battery Refresher using one of the two options here:
– Stick it to the required place such as the battery, using the double-sided adhesive
tape included in the scope of delivery.
– Screw the Battery Refresher to a wall with 3mm screws (not to the battery).
NOTICE!
A
Observe the polarity.
Reversing the polarity of the connections can damage the Battery Refresher.
NOTE
I
You do not need to remove the terminals for connecting the Battery Refresher
from the battery poles.
➤ Connect the black cable (–) with the cable lug to the negative terminal of the battery.
➤ Connect the red cable (+) with the cable lug to the positive terminal of the battery.
7

Using the Battery Refresher

The Battery Refresher switches on automatically if the battery voltage is above 12.8 V
(MBR-100-12) or 25.8 V (MBR-100-24). The green LED lights up.
If the battery voltage drops below 12.6 V (MBR-100-12) or 25.2 V (MBR-100-24), the
Battery Refresher switches off. The green LED goes out.
8

Maintaining and cleaning the Battery Refresher

NOTICE!
A
Do not use sharp or hard objects or cleaning agents for cleaning as these may
damage the product.
➤ Occasionally clean the product with a damp cloth.
9

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when you
send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
EN
Installing the Battery Refresher
13