Maintenance And Cleaning - Sunrise Medical Jay J3 Manual De Instrucciones

EngLIsh
maIntEnancE
Sunrise recommends that all fasteners be checked for wear,
such as loose bolts or broken components every 6 months.
loose fasteners should be retightened according to the
installation instructions. all fasteners should be tightened to
torque specifications as stated in the hardware installation
section. contact your authorized Sunrise Medical supplier
immediately to replace any broken components. Do not
continue to use the system after identifying loose or broken
components.
easy cleanIng
notE: When disassembling the back for cleaning, note the
position of the Velcro® Spine align components for correct
reassembly.
to clean back cover
Remove cover by detaching Velcro. Detach cover from
back shell. locate zipper on bottom of the cover and unzip.
Remove foam and turn cover inside out. Zip cover closed to
avoid snagging. Machine wash in warm water (60°c). Drip or
tumble dry on low heat.
notE:
Do not dry clean covers or use industrial washers
and dryers to clean cover. Do not steam autoclave.
Do not bleach.
Reinsert the foam into the cover. Please note, the base has
two layers of foam. When reinserting the foam, ensure that
the thinner "light grey" foam is facing the shell. Once the
foam is secured inside the cover, zip cover closed.
to clean back shell
Shell may be wiped clean with soap and water. No other
maintenance should be required.
to clean positioning components
Positioning components can be wiped clean with soap and
water. Do not immerse positioning components underwater.
If you have any additional questions regarding cleaning pro-
cedures, please contact your authorized Sunrise Medical
dealer.
MaI NTE NaN cE aND c lEaN IN G
Laundry care symbols
5
Machine wash in warm
water (60° c)
Only non-chlorine bleach,
when needed
Drip dry
Do not iron
Do not dry clean
106109 Rev. D