Operating Your Trail Camera - MINOX DTC 1200 Manual De Instrucciones

OPERATING YOUR TRAIL CAMERA

MODE SWITCH
MODE
OFF (OFF MODE)
SETUP (TEST MODE)
ON (LIVE MODE)
CONTROL BUTTONS
•
Push the mode switch to SETUP, to activate the display. The red LED in the LED window will light up for a moment to
indicate movement in front of the motion sensor.
•
Use the control buttons to view the current camera settings, view photos on the SD card and manually upload a photo to the
MINOX Cloud.
•
Note that a photo can only be sent if the trail camera has been bound to your MINOX account via the app, and data transfer
has been activated.
The following control buttons are available for this purpose:
CONTROL BUTTON
MENU
SHOT
OK 
To turn the trail camera off, set the mode switch to OFF.
The battery symbol in the display indicates the available battery charge.
SETUP MODE
In the Setup Mode, you can record photos or videos with your trail camera, or view previously recorded files. This allows you to better
align the trail camera on site and check the image transmission.
• Push the mode switch to SETUP.
• Push the SHOT button to record an image.
• Push the OK button to view the image.
• Push the MENU button to enter the menu for further settings.
• Choose SEND to upload your image to your user account in the MINOX Cloud.
The trail camera is completely switched off
You can make and view recordings while in test mode (see further below in
the "Operation" section).
You can use the live view to align the camera
Camera settings can only be changed using the app
The trail camera is activated and will independently record images (Live
Mode).
Settings menu
Manually record an image or video
Switch to Playback Mode
FUNCTION
.
.
.
FUNCTION
31