Optional Extras - Metz MECABLITZ 70 MZ-4 Manual De Instrucciones

three visible, weak preflashes, before the shutter curtain opens and the
measuring beam is emitted for the multi-sensor (if permitted by the flash
unit and camera), and only then fires the main flash. These three preflashes
induce the pupils to close further, thereby diminishing the red-eye effect.
This function is available in any exposure programme. For further details
please refer to the operating instructions for the given camera.
• 3D-TTL flash control (only possible with Nikon)
In this mode hardly visible measuring beams are emitted as the shutter
release is depressed, before the shutter curtain opens. They supply the
camera with the necessary information regarding brightness and contrast.

18. Optional extras

Metz does not accept any liability or grant a guarantee for faulty
functions or damage to the mecablitz caused by the use of accessories
from other manufacturers.
• Bounce diffusor 50-23
(Item No. 000050237)
To soften heavy shadows by reflected light.
k
• Bracket 70-35
(Item No. 0007035)
To attach the flashgun to the side of the camera.
• Colour filter set 50-32
(item No. 000050323)
Produce interesting colour effects when attached to the main reflector.
• Nicad battery 50-40
(Item No. 0005040)
• Extension cord 1m
(item No. 000050600)
• Holding device 50-35
(Item No. 0050358)
For mecablitz 50 MZ-5 control unit for use with camera without accessory
shoe.
110
• Mecalux 11
(Item No. 0000011)
Sensor for optical, delay-free remote triggering of slave flashguns by the
camera-triggered flash. Responds also to infrared light beam. Does not
require batteries.
• Mecalux Holder 60-26
(Item No. 0006026)
To mount the Mecalux 11.
• NiMH battery set 50-45
(Item No. 00129550)
Nickel metal hydrid battery with charger. An ecological, hihg-capacity
alternative to the NiCad battery.
• Power Pack P 50
(Item No. 0012950)
For a higher number of flashes.
• SCA Adapter System 300
For flash with system cameras (see separate operating instructions).
• SCA Adapter System 3002
For flash with system cameras with digital data transmission of the SCA
function. Extended functional features compared with the SCA 300 System
(see separate operating instructions).
• Slave Adapter 3083
(Item No. 0033083)
For visual and acoustic flash-readiness display in cordless remote control.
• Stabilizing Set 30-28
(Item No. 0003028)
For parallel flashgun mounting in conjunction with the camera bracket.
• Synch lead SCA 307 A
(Item No. 0009307)
For off-camera flash control, and when using a camera bracket.