Siemens Euroset 3010 Instrucciones De Manejo página 23

Quick Reference Guide
FUNCTION PROCEDURE
TEMPORARY CHANGOVER
OF DIALING MODE (TONE /
PULSE)
...
SETTING THE RINGER
VOLUME
...
SETTING THE RINGER
MELODY
...
SETTING THE RECEPTION
VOLUME
or
STORING PHONE NUMBERS
IN MEMORIES
...
USING THE MEMORIES TO
or
MAKE A CALL
REDIAL
After establishing a call, change to TONE by pressing the
key (i.e. to use telebank services).
Lift the handset and press the PROG key
+
Enter one of the following codes:
51 (low vol.), 52 (medium vol.) or 53 (high vol.)
Press the PROG key
Listen the confirmation tone - long beep
Hung up
Lift the handset and press the PROG key
+
Enter one of the following codes:
61 (melody 1), 62 (melody 2) or 63 (melody 3)
Press the PROG key
Listen the confirmation tone - long beep
Hung up
Lift the handset and press the PROG key
+
Enter one of the following codes:
91 (normal vol.) or 92 (high vol.)
Press the PROG key
Listen the confirmation tone - long beep
Hung up
Lift the handset and press the PROG key
+
One-touch Mem.: press the desired one-touch memory
key
Two-touch Mem.: press the MEM key followed by the
+
desired two-touch memory key
Enter the phone number to be stored
Press the PROG key
Listen the confirmation tone - long beep
Hung up
Lift the handset
One-touch Mem.: press the desired one-touch memory
key
Two-touch Mem.: press the MEM key followed by the
+
desired two-touch memory key
To redial the last dialed number, press the REDIAL key
22