Topcom BUTLER E751 Manual De Usuario página 15

2 Select "CLOCK&ALARM" and confirm.
3 Select "ALARM" and confirm.
4 Select "ONCE", "DAILY" or "OFF" and confirm.
Set the alarm time
1 Enter the menu by pressing the menu key.
2 Select "CLOCK&ALARM" and confirm.
3 Select "ALARM" and confirm.
4 Select "ONCE" or "DAILY" and confirm.
5 Enter the time (HH-MM) in 24h format and confirm.
You can still press any key to turn the alarm off when the keypad is locked.
The alarm volume is the same as the ring volume, when the ring volume is set off,
the alarm will ring at volume 1.
During a call when alarm goes active, you will hear a warning tone through the ear
piece, you can still turn it off by pressing any key.
During paging or ringing, no alarm tone will be hearable.
Alarm melody
1 Enter the menu by pressing the menu key.
2 Select "CLOCK&ALARM" and confirm.
3 Select "ALARM TONE" and confirm.
4 Select the desired melody and confirm.
6.11 Tone setup
When pressing a key, when battery is low , when placing the handset inside the charger, or when
the handset is out of range you will hear a warning tone. You can turn this On or Off::
1 Enter the menu by pressing the menu key.
2 Select "HS SETTINGS" and confirm.
3 Select "HANDSET TONE" and confirm.
4 Select "KEY BEEP", "BATTERY TONE" , "CHARGE TONE"or
5 Select "ON" to activate or "OFF" to deactivate and confirm.
6.12 Voice message notification
If you have new messages in your voice mail box,
access number so you can get your message at the touch of the '1' button.
To set up your voice access number:
1 Enter the menu by pressing the menu key.
2 Select "HS SETTINGS" and confirm.
3 Select "VOICEMAIL" and confirm.
4 Enter your access number (up to 24 digits) and confirm.
"RANGE TONE" and confirm.
blinks on the display. You can program your
Personalize the handset
15