5. Remove the adjustable foot from another side of
the bottom and transfer it to the corresponding
position on the opposite side of the bottom.
7. Carefully set the door back into place. Ensure
the door is aligned horizontally and vertically so
that the seals are closed on all sides before
finally tightening the top hinge.
Insert the hinge back and screw it to the
top of the appliance.
9. Put the top cover back and fix it in place with
the screws.
TIPS FOR SAVING ENERGY
For the most energy efficient use of your appliance:
Ensure your fridge has adequate ventilation as recommended in the installation instructions.
6. Attach the screws, hinge bracket and
adjustable foot to the opposite side of the
bottom. Loosely secure.
8. Use a spanner to tighten it if necessary.
10. With the door closed, check that the door is
14
aligned horizontally and vertically and that
the seals are closed on all sides before finally
tightening the bottom hinge. Readjust the
levelling feet as required.
GB