Preparations; Connections - Aiwa NSX-HMA56 Manual De Instrucciones

PREPARATIONS

CONNECTIONS

Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local voltage.
1 1 1
1 1
Connect the right speaker to the main unit.
1 Connect the speaker cord with the plug to the SPEAKERS
HIGH FREQ R terminal.
2Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R 0 terminal and the black cord
to the 9 terminal.
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
4
ENGLISH
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
2 2 2
2 2
Connect the left speaker to the main unit.
Connect the speaker cord with plug to the SPEAKERS HIGH
FREQ L terminal, and another speaker cord to the
SPEAKERS LOW FREQ L terminals in the same manner
as step 1.
3 3 3
3 3
Connect the surround speakers.
Connect the surround speaker cords to SURROUND
SPEAKERS terminals.
4 4
4 4 4
Connect the center speaker.
Connect the center speaker cord to CENTER SPEAKER
terminal.