Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.5 Power off
Move the Main switch to OFF position to power off the
camera. Please note that even in the OFF mode, the
camera still consumes certain power at μA level. There-
fore, please remove the battery if the camera will not be
used for a long time.
4. Advanced operations
From the basic operations of the camera in the previ-
ous chapter, we know that the camera has three basic
operation modes:
1. OFF mode:
Main switch is in OFF position.
2. ON mode:
Main switch is in ON position.
3. TEST mode:
Main switch is in ON position and
the control is connected to the
camera.
The OFF mode is the specified safe mode for replacing
the SD-card or batteries and transporting the camera.
ATTENTION!
Replace SD-card only in OFF mode!
4.1 Settings
Picture
Video
mode
mode
To make any specific settings the handbox must be con-
nected with the camera and an SD-card must be installed.
Then, change into the TEST mode explained before.
To open the settings menu, press
until the you reach the settings option and confirm your
selection with the „OK" key. The menu will now appear on
your handbox display.
Settings
Description
Working time
The camera will be woken up at a cer-
tain time in a day. For the rest of the time
period
the camera is shut off.
Interval
The interval for the triggering of the
camera can be adjusted.
GB
Preview
Settings
mode
mode
or
on your handbox
31
Publicidad
Tabla de contenido
