Optional Equipment; Machine Storage; Service And Repair; Thread Cutting Oil Information - RIDGID 700 Manual Del Operario

optional equipment

WARNING
To reduce the risk of serious injury, only use equip-
ment specifically designed and recommended for
use with the 700 Power drive such as those listed
below.
Catalog
No. Description
42600 770 Adapter for 00-R (1/8" – 1") and 00-RB (1/4" – 1")
42605 771 Adapter for 0-R (1/8" – 1")
42610 772 Adapter for 11-R (1/8" – 1¼")
42615 773 Adapter for 111-R (1/8" – 1¼")
42620 774 Square Drive Adapter -15/16 "
42625 775 Support Arm
46615 Torque Arm
42950 B-171-X Metal Carrying Case
10883 418 Oiler w/1 Gallon of Premium Thread Cutting Oil
41620 Gearhead Motor Grease
Further information on equipment available for 700
Power drive specific to the tool can be found in the
RIdGId Catalog and online at RIdGId.com.

Machine Storage

The 700 Power Drive must be kept indoors
WARNING
or well covered in rainy weather. Store the machine in a
locked area that is out of reach of children and people unfa-
miliar with the machines. This machine can cause serious
injury in the hands of untrained users.

Service And Repair

WARNING
Improper service or repair can make machine
unsafe to operate.
The Maintenance Instructions will take care of most of the
service needs of this machine. Any problems not ad -
dressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Independent Service
Center or returned to the factory. Use only RIDGID service
parts.
For information on your nearest RIDGID Independent
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com to find your local RIDGID contact
point.
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.
700 Power Drive

Thread Cutting oil Information

Read and follow all instructions on the threading oil label
and Safety Data Sheet (SDS). Specific information about
RIDGID Thread Cutting Oils, including Hazard Identi fi ca tion,
First Aid, Fire Fighting, Accidental Release Measures,
Handling and Storage, Per sonal Protective Equipment,
Disposal and Transportation, is included on the container
and SDS. SDS is available at RIDGID.com or by con-
tacting Ridge Tool Technical Service Department at (800)
519-3456 in U.S. and Canada or rtctechservices@emer-
son.com.

disposal

Parts of the 700 Power Drive contain valuable materials
and can be recycled. There are companies that spe-
cialize in recycling that may be found locally. Dispose of
the components in compliance with all applicable regu-
lations. Contact your local waste management authority
for more information.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2012/ -
19/EU for Waste Electrical and Electronic
Equipment and its implementation into nation-
al legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
11