medi CIRCAID Instrucciones De Uso página 7

Ocultar thumbs Ver también para CIRCAID:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
face the skin. Make sure that the lateral
rise of the garment is positioned on the
lateral side of the upper leg.
Step 3: Unroll the top two bands and
loosely secure them far enough below
the groin as to not cause discomfort.
This will anchor the legging in place and
enable you to easily raise or lower the
garment for correct positioning.
Step 4: Unroll the bottom two bands and
secure the bottom most band to the
outside of the legging to a firm and
comfortable compression level.
Step 5: While holding the second band,
detach the next band. Secure the second
band and continue this process with the
other bands, going up the leg.
Step 6: The garment should lay flat and
wrinklefree against the leg. Adjust each
band to a firm and comfortable
compression level. Ensure that the
bands are placed in an alternating order.
Step 7: Once all bands are secured,
inspect the garment for any gaps or
creases. Adjust the bands as necessary.
Recommendation for combination of
lower and upper leg with knee
garments:
If combining a circaid juxtafit premium
lower leg with a circaid juxtafit premium
upper leg with knee, ensure that the
upper leg with knee overlaps with the
lower leg.
Doffing the circaid® juxtafit®
premium upper leg with knee:
Step 1: If wearing a circaid knee cover
additionally, remove the circaid knee
cover first.
Step 2: Detach all bands of the legging
starting with the top band. Fold each
band onto itself to keep the Velcro tabs
lint-free.
Step 3: Remove the garment and then
remove the circaid undersleeve.
Purpose of circaid® juxtafit® premium
shelf strap:
The circaid juxtafit premium shelf strap
offers additional support and coverage
to shelves and lobules that may be
present on the limb. The strap covers
potential gaps that may appear in
between straps.
Donning the circaid® juxtafit®
premium lower leg with attached
circaid® juxtafit® premium ankle foot
wrap:
Step 1: Apply a circaid sock first. Ensure
that the circaid sock is pulled over the
knee. The seam of the sock should face
out. Ensure that there are no wrinkles in
the sock.
Step 2: Align the garment just below the
knee. The black side of the material
should face the skin. Unroll the top two
bands and loosely secure them to the
outside of the garment to anchor the
legging in place. This enables you to
easily raise or lower the garment for
correct positioning.
Step 3: Press your heel firmly into the
heel cup of the attached ankle foot
wrap.
Step 4: Unroll the band closest to the
toes and secure it to the opposing side
with firm and comfortable compression.
Step 5: Then unroll the second and third
band. While holding the third band,
attach the second band on the opposing
landing pad with firm and comfortable
compression.
English
English

Publicidad

Tabla de contenido
loading

Tabla de contenido