Echo DHC-200 Manual De Instrucciones página 12

For safe use of your product
Starting the unit
Be particularly careful to observe the following precau-
tions when starting the unit:
Always ensure all handles and guards are fitted
Check that none of the nuts and bolts are loose
Check that the cutter blades are not damaged or exces-
sively worn. If you find any abnormalities, do not use
the product.
Place the product in a flat, well ventilated place
Leave plenty of space around the product and do not al-
low people or animals near it
Remove obstructions, if any
Make sure that the cutter blades are not touching the
ground or any obstacles
Failure to observe the precautions could cause an accident
or injury, or even lead to a fatality.
Once the unit has started, check for abnormal vibra-
tions and sounds
Check that there are no abnormal vibrations or sounds
once the unit starts. Do not use the product if there are
abnormal vibrations or sounds. Contact your dealer to
have it repaired.
Accidents involving parts that fall or shatter off can cause
wounds or serious injury.
WARNING
Do not touch high temperature or high voltage com-
ponents while the product is running
Do not touch the following high temperature or high volt-
age components while the product is running or for some
time after it stops.
High temperature components
You could burn yourself if you touch a high
temperature component.
High voltage components
You could receive an electric shock if you
touch a high voltage component while the
product is running.
Turn off the unit when checking or maintaining the
product
Observe the following precautions when checking and
maintaining your product after use:
Turn off the unit and do not attempt to check or maintain
the product until the unit has cooled
You could burn yourself.
10