NM250A
2-way, bi-amplifed, active loudspeaker system
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
In order to protect your own and other's safety and to avoid invalidation
of the warranty of this product, please read this section carefully before
operating this product.
This product has been designed and manufactured for being operated as
active speaker system in the applications typical of a sound reinforcement
system or a sound recording system. Operation for purposes and in
applications other than these has not been covered by the manufacturer in
the design of the product, and is therefore to be undertaken at end user's
and/or installer's sole risk and responsabiIity.
TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK:
The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus. Never
let any liquid, as well as any object, enter the product. In case, immediately
disconnect it from the mains supply and refer to servicing before operating
it again.
This unit conforms to CLASS I insulation, and for safe use it is required that
the protective earth contact is connected to a grounded (earthed) outlet.
Never place burning candles or other sources of open flame on top of the
device.
Before connecting this product to the mains supply, always make sure that
the voltage on the mains outlet corresponds to that stated on the product.
This product must be connected only to a grounded mains outlet complying
to the safety regulations in force via the supplied power cable.
In case the power cable needs to be substituted, use exclusively a cable of the
same type and characteristics.
This device is connected to the power line even when the mains switch is
in the 'O' (=off) position and the power indicator is off. As long as it is
plugged in there are dangerous electrical potentials inside the device, so,
before undertaking any sort of maintenance work etc., always make sure it
has been unplugged from the mains socket.
Never place any object on the power cable. Never lay the power cable on a
walkway where one could trip over it. Never press or pinch it.
Never install the product without providing adequate air flow to cool it.
Never obstruct the air intake openings on it. Leave enough room to get to
the mains power socket and the mains connector on the back panel.
In case the external fuse needs replacement, substitute it only with one of
the same type and rating, as stated on the product.
Always make sure the Power switch is in its 'O' (=off) position before doing
any operation on the connections of the product.
Before attempting to move the product after it has been installed, remove
alI the connections.
To disconnect the power cable of this product from the mains supply never
pull the cable directly. Hold the body of the plug firmly and pull it gently from
the mains supply outlet.
CAUTION!
This product does not contain user serviceable parts.
To prevent fire and/or electrical shock, never disassemble it or
remove the rear panel. For maintenance and servicing always
refer to the official Montarbo Distributor in your Country or to
qualified personnel specifically authorized by the Distributor.
Before placing the product on a surface of any kind, make sure that its
shape and load rating safely match the product size and weight. Never
attempt to hang the product by any means not expressly provided or
approved by the manufacturer (i.e. ropes, chains, belts or whatever
medium, through carrying handles, bolts, hooks or whatever). In case
the product is factory-fitted with specific mounting hardware, always
verify before installation that the lifting and/or hanging system you
intend to use is of a proper type and can carry the product weight
with the safety ratio required by the regulations in force.
To avoid shocks, kicks, or whatever action, always reserve a protected
area with no access to unqualified personnel as installation site of the
product. In case the product is used near children and animals, closest
supervision is necessary.
This product can generate very high acoustic pressures which are
dangerous for the hearing system. Always avoid operation at loud
levels if anyone is excessively near to the product (at least 1 m of
distance).
Never expose children to high sound sources.
English
SAFETY INSTRUCTIONS
33