5
Select the Wireless Network of your choice by clicking on its
name. The entire block is highlighted.
6
Select Connect in the lower right corner.
The next Wireless Network Connection dialog box appears, as
shown here:
7
Enter the Network Key (WEP Key or WPA Key) for your Wireless
Network.
If your network is using WEP encryption, then a HEX or an ASCII
format is necessary when entering your Network key:
HEX — 10 Characters in HEX notation for 40 bit or 26
■
characters for 128 bit encryption.
ASCII — 5 Characters for 40 bit or 13 characters for 128 bit
■
encryption.
If your network is using WPA or WPA2 encryption, you must
enter an 8 – 63 character alphanumeric key-phrase.
8
Select Connect.
What to Do Next
17