Pair And Connect The Headset; Basic Functions; Wearing The Headset - i.safe MOBILE ORBIT 2.0 Manual Del Usuario

English

8.5 Pair and Connect the Headset

1. Ensure that your mobile device is switched on and the headset is turned off.
2. Press and hold the talk button (for about 3 seconds) until the indicator light
is blue permanently (it is possible at 1st power on the headset still get into
pairing mode directly)
3. Within about 3 minutes, activate Bluetooth connectivity on your device, and
set it to search for Bluetooth devices.
4. Select the headset ORBIT 2.0 from the list of found devices.
5. If necessary, enter the passcode 0000 to pair and connect the headset to
your device. In some devices, you may need to make the connection separa-
tely after pairing. When the headset is connected to your device and is ready
for use, the blue indicator light just flashes about every 5 seconds.
8.6 Volume selection
Press volume down or up at the volume button to decrease or increase the
volume of the earpiece.

9 Basic Functions

9.1 Wearing the Headset

The headset is ready to be used on the left and right ear. Just rotate the ear
loop. Point the headset with the microphone (4) towards your mouth.
9.2 Calls
• To make a call, use your mobile device in the normal way when the headset
is connected to it.
• To answer or end a call, press the answer / end key.
• To reject a call, press the answer / end key for 3 seconds.
8
i.safe MOBILE