PPS 3M Manual De Instrucciones página 5

14. Clean the gun and adapter with appropriate materials and store appropriately.
15. Unscrew the 3M™ PPS™ Series 2.0 Retaining Collar Shroud Assembly (6) by turning the ring counter-
clockwise and remove it from the 3M™ PPS™ Series 2.0 Type H/O Pressure Cup (1).
16. Remove the 3M™ PPS™ Series 2.0 H/O Lid (5) and Liner (4) and dispose of properly referring to the
material SDS and consulting local regulations.
17. Clean the 3M™ PPS™ Series 2.0 Type H/O Pressure Cup (1) and 3M™ PPS™ Series 2.0 Retaining
Collar Shroud Assembly (6) by wiping with solvent and a lint free towel. Store in a clean, dry area.
Caution: Do not soak in solvent.
See your local 3M
Representative for
adapter type
3M™ PPS™ Series 2.0
Type H/O Pressure Cup
7
6
5
4
3
1
1a
1b
1c
2
Figure 2
Figure 1
Component Listing
Item # Description
1 3M™ PPS™ Series 2.0 Type
H/O Pressure Cup (Large)
3M™ PPS™ Series 2.0 Type
H/O Pressure Cup (Midi)
1a Pressure Hose Clip
1b Pressure Hose Port
1c Pressure Relief Valve
2 Pressure Hose
3 3M™ PPS™ Mix Ratio Film
Insert (Optional)
4 3M™ PPS™ 2.0 Liner
5 3M™ PPS™ 2.0 Lid
6 3M™ PPS™ 2.0 Retaining
Collar Shroud Assembly
7 3M™ PPS™ Series 2.0 Plug
English - 4
3M Part Number
PN 26124 - Large
PN 26121 - Midi
PN 16123
PN 16091 - Large
PN 16155 (Midi)
(100 Liners) - Large (PN16351)
(100 Liners) - Standard (PN16350)
(100 Liners) - Midi (PN 16349)
(100 Liners) - Mini (PN 26348)
(50 Lids/Box) - Large/Standard
(PN26150)
(50 Lids/Box) - Midi/Mini (26151)
Included with PN 26124
Included with PN 26121
Included with PN 26432