Brita MAXTRA Manual De Instrucciones página 11

Hook the lid in its assembly jigs into the jug
and press it down towards the handle.
Fill your BRITA water fi lter directly under the
tap with cold water.
The stream of tap water activates the auto-
matic pour through lid.
The pour through lid closes automatically when
the maximum fi lling level has been reached.
BRITA water fi lter with fl ip top lid
Carefully press the lid onto the jug until it is in
place.
Open the fl ip top lid and place the opening
under the tap.
Fill your BRITA water fi lter directly under the
tap with cold water.
BRITA water fi lter without pour
through opening
Remove the lid and fi ll the funnel with cold tap
water.
Press the lid onto the jug until it is in place.
5 Activate the MAXTRA cartridge
The MAXTRA cartridge must be activated with
the fi rst two fi llings. Discard the fi rst two fi ll-
ings or use the water for your plants.
With the third fi lling the MAXTRA cartridge is
ready for use – you will enjoy cleaner, clearer
great tasting BRITA fi ltered water.
6 Cartridge exchange indicator adjustment
Your BRITA cartridge exchange indicator will
prompt you when you need to change the
MAXTRA cartridge. The indicator is in the lid of
your BRITA water fi lter.
BRITA recommends the exchange of your
MAXTRA cartridge at least every four weeks
(30 days) to ensure optimum fi ltration perfor-
mance.
Variants
BRITA water fi lter with BRITA Meter
Always enjoy cleaner, clearer great tasting
BRITA fi ltered water thanks to the intelligent
BRITA Meter – exclusively developed for
MAXTRA. BRITA Meter monitors the fi ltration
performance and indicates the remaining
cartridge life. The 3-way measurement takes
into consideration the volume of water fi ltered,
water quality (hardness) and time.
After activating the MAXTRA cartridge press
the "START" button for approx. six seconds
until all four bars appear in the display and
"O.K." fl ashes.
As long as your display shows "O.K." the
MAXTRA cartridge fi lters with optimum
performance.
The percentage in each bar of your display indi-
cates the remaining capacity of your MAXTRA
cartridge.
Water drops that recurrently fl ash from top
to bottom indicate an actively processing
fi ltration.
If the empty cartridge symbol "NEW" fl ashes,
you should now exchange the MAXTRA
cartridge.
11
ENGLISH