Rechargeable Battery Pack (For Pt-7600 Only) - Brother P-touch EDGE 7500 Guía De Usuario

☞ Make sure that the batteries are inserted so that their poles point in the correct direction.
With batteries installed, the P-touch labeler determines the remaining battery charge
during printing and feeding. If a low battery charge is detected, the low battery indicator
()) comes on. When this occurs, be sure to replace the batteries. The low battery
indicator may not come on in some operating conditions.
☞ Before replacing the batteries, make sure that the P-touch labeler is turned off. In
addition, when replacing the batteries, insert the new ones within two minutes of
removing the old ones, otherwise the text shown in the display and any text stored in the
memory will be lost.
☞ If you do not intend to use this P-touch labeler for an extended period of time, remove
the batteries. When the power is disconnected, all text shown in the display and stored in
the memory will be lost.

Rechargeable battery pack (for PT-7600 only)

The machine has a rechargeable battery pack that allows you to use it anywhere when
charged, and an AC adapter that allows you to use it while connected to an electrical
outlet when the rechargeable battery pack's charge becomes low.
☞ To increase the life of the rechargeable battery pack, it is required to charge every six
months.
Installing the rechargeable battery pack
1
3
2
7