Port And Panel1 Modes - Brother P-touch EDGE 7500 Guía De Usuario

Port and Panel1 Modes

Labels printed using these Label Type modes can be used to identify various
components or panels.
With the Port Label Type mode, each block of
the text is printed on a separate label, making
these labels useful for identifying different
components or ports that are not equally spaced.
With the Panel1 Label Type mode, all blocks of
the text are evenly spaced on a single label,
making this label useful for a row of equally
spaced switches, fuses or connectors on a patch
panel. In addition, the text blocks can be printed
in the order that they were typed in or in the
opposite order.
Port
Panel1
(PRINT set to
FRONT)
Panel1
(PRINT set
to REVERSE)
After selecting the PORT or PANEL1 Label Type mode, specify the length of each text
block or label, and select a frame style if desired. For the PANEL1 Label Type mode,
select whether the text blocks are printed in the order that they were typed in or in the
reverse order.
16
Block length
Block length Block length
FRONT
Block length Block length
Block length
REVERSE
Block length