Troubleshooting Guide - Ibiza sound DJ150 Manual De Instrucciones

BACK PANEL –AMPLIFIER
1. AUX signal input
2. Right speaker output
3. Left speaker output
4. Power : 220-240Vac 50/60Hz
WIRING THE SPEAKERS
IMPORTANT: please turn off your amplifier before connecting or disconnecting
speakers
• Ensure that you connect the positive speaker terminal (red) to the positive (red)
amplifier speaker output. Take care to ensure that the polarity is preserved ie do
not connect the negative speaker terminal to the positive amplifier speaker output.
• Repeat for the negative speaker terminal (black) and the negative (black) amplifier
speaker output.
Warning: Always switch the amplifier off at the plug when connecting other devices
like DVD or CD Players.
USING THE AMPLIFIER
Select a sound source
Turn the VOLUME button to the lowest first. Switch the unit on. Use input signal button
to select the sound source.
Turn the VOLUME butt on to adjust Left and Right channel to a suitable level.
Use the USD play buttons to adjust the MP3 music playback.
Use the TREBLE button to adjust the treble to a suitable level.
Use the BASS button to adjust the bass to a suitable level.
Use the BALANCE button to adjust the volume level of R/L CH.
© Copyright Lotronic 2014
Playing Karaoke
Turn the VOLUME button to the lowest first. Switch the unit on. Use the input signal
button to select the sound source.
Turn the MIC VOL button to the lowest, plug a microphone into the MIC Jack, adjust the
MIC VOL control to a suitable level.
BLUETOOTH Mode & PAIRING
Select the BLUETOOTH function via the input selector switch.
Activate the Bluetooth function on your Bluetooth cell phone so that the cell phone
starts searching for Bluetooth devices (please refer to the Users' Manual of cell phone
for more details).
Select «IBIZA – DJ150» in the list of the found devices

TROUBLESHOOTING GUIDE

Problem Possible Reason
No Power Unit is not plugged in correctly
Fuse blown
No sound Cables connection not secure
Speakers cables are not connected
Volume is very low.
Input source in MUTE mode.
Noise from Cables damaged or contacts not secure
Speakers Strong magnetic interference when placed
close to the amplifier
No sound Microphone is OFF
from MIC volume is very low
Microphone
Howling Microphone too close to speakers
DJ150
Examine & Repair
Check the power outlet
Contact technical personal
Check all connection
cables.
Check the connection
between amplifier &
speakers.
Turn the VOLUME button
clockwise to a higher level.
Release the input source
MUTE mode.
Change cables or check the
connection jack.
Reposition the amplifier
further away from the
speakers
Turn on the Microphone.
Switch MIC VOL to a higher
level.
Move microphone further
away from speakers or
switch MIC VOL to a lower
level.