Power Input - Olymp LavaSit COMFORT Instrucciones De Servicio

b. Care of the plastic surfaces
• Clean the plastic surface of the base with a damp cloth or a micro-fibre cloth, if necessary with
a mild household cleaning fluid.
• Under no circumstance use an abrasive cleaner!
• Please ensure that spots of various hair chemical agents (above all directly applied colouring
agents) do not fall on the plastic surfaces, as these cannot be removed.
4. Accessories
• Seat cover (Fig. 5)
To protect the upholstery you can lay a cover over the back of the seat.
• Towel holder (Fig. 6)
As an optional extra the wash unit can be equipped with a chromed towel holder (on the left, the
right or on both sides - on each side, however, only one towel holder or one oddments tray is
possible).
5. Variants of the power supply
a. Direct wiring (230V/50Hz AC)
• The electrically operated leg rest is connected via a transformer/control unit with a power cable
supplied by the customer.
• Connection to the power supply must be made only by a qualified electrician!
b. Power supply (230V/50Hz AC)
• The electrically operated leg rest is plugged into a cover protected socket supplied by the
customer via a transformer/control unit with an external power cable.
• Optional: Cable conduit for floor anchoring (Fig. 7) to reduce risk of tripping. Lay the power
supply cable from the wash unit through the conduit to the socket.
• If the wash unit is wall mounted (input and output water via installation shaft from the wall), the
power supply cable can be laid to the wall in the upper area of the installation shaft and be
plugged into a wall socket there.
• When several units are installed in-line the power supply cable of one unit must not
be connected further to another unit!
Environment:
For the correct disposal of this product, special national regulations or ordinances may apply. Please observe
these regulations carefully.
Voltage: Europe

Power input:

Device in protective class:
EU conformity:
Certification:
GB
230 V / 50 Hz
60 W
1I
The washing unit complies with the regulations as under the low-voltage
regulations 98/79/EG and the regulations governing electromagnetic
compatibility 89/336/EWG.
CE conformity identification
4