BEFORE ASSEMBLY
WARNING
CHOKING HAZARD
Small parts. Not suitable for children under 36 months. The product contains small
parts, keep children away when assembling.
ADULT ASSEMBLY REQUIRED.
Always remove protective material and poly bags and dispose before assembly
−
Make sure that the power switch is turned "OFF" before assembling the ride- on.
−
Before first time use, charge the battery for at least 4 to 6 hours.
−
Assembly tools required:
Screwdriver
(not included)
BATTERY INFORMATION
WARNING
Non-rechargeable batteries are not to be recharged.
×
Rechargeable batteries are to be removed from the toy before being charged.
×
Rechargeable batteries are only to be charged under adult supervision.
×
Different types of batteries or new and used batteries are not to be mixed.
×
Batteries are to be inserted with the correct polarity.
×
Exhausted batteries are to be removed from the toy.
×
The supply terminals are not to be short-circuited.
×
ASSEMBLY
ATTACH THE REAR AXLE
Remove all the parts from the
rear axle, and turn the vehicle
body upside down.
1.
Slide a Ø10 washer
onto
the
rear
from the longer end.
2.
Insert the rear alxe
with a Ø10 washer
into the hole in the
vehicle
body
right hand side.
1
axle
from
Spanner
57
Hexwrench
2
EN