PLAYKIN POLICE Manual Del Usuario página 60

CONNECT THE HANDLE BAR
1
Turn the vehicle body upright.
1. Plug the connector of the vehicle body into the connector of the handle bar.
2. Fit the handle bar assembly against to the vehicle body. And lines up the holes of the vehicle
body with the holes of the handle bar.
3. Insert the M8x100 bolt into the hole of handle bar, through the holes on the handle bar, and
out through the hole on the vehicle body.
4. Tighten a Ø8 locknut to the end of the bolt with a spanner.
3
2
4
60