Battery Replacement & Fuse - PLAYKIN POLICE Manual Del Usuario

BATTERY REPLACEMENT & FUSE
The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to
the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be
restored after the unit is turned OFF for five Minutes and then turned ON again. If the thermal fuse trips
repeatedly during normal use, the vehicle may need repair. Contact your distributor please.
To avoid losing power, follow these guidelines:
Do not overload the vehicle.
×
Do not tow anything behind the vehicle.
×
Do not drive up steep slopes.
×
Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
×
Do not drive in very hot weather, components may overheat.
×
Do not allow water or other liquids to come in contact with the battery or other electric components.
×
Do not tamper with the electric system. Doing so may create a short, causing the fuse to trip.
×
BATTERY REPLACEMENT AND DISPOSAL
The battery will eventually lose the ability to hold a charge. Depending on the amount of use, and
varying conditions, the battery should operate for one to three years. Follow these steps to replace and
dispose the battery:
1. Remove the car seat.
2. Disconnect the battery connectors.
3. Remove the battery bracket.
4. Remove the battery cover.
5. Carefully lift the battery.
Depending on the condition of the battery (i.e.: leakage) you may want to wear protective gloves
×
before removal.
Do not lift the battery by its connectors or cables.
×
6. Place the dead battery in a plastic bag.
Important! Recycle the dead battery responsibly. The battery contains lead acid (electrolyte) and
must be disposed of properly and legally. It is illegal in most areas to incinerate lead acid batteries or
dispose of them in landfills. Take it to a federal or state-approved lead acid battery recycler, such as local
automotive battery retailer.
Do not throw the battery away with your regular household waste!
7. Replace the battery and reconnect the connectors.
8. Replace the metal battery bracket.
9. Replace the seat.
66