Nevadent NZR 1.5 A1 Instrucciones De Uso página 47

6) Pull the cleaning attachment 2 out of the interdental
space and continue cleaning with the next interdental
space.
NOTE
► Divide your jaw into 4 quadrants. Once you have
cleaned all the interdental spaces in one quadrant, rinse
the cleaning attachment 2 under running water.
7) After completing the cleaning session, rinse the cleaning
attachment 2 thoroughly under running water. Hold the
appliance so that the cleaning attachment 2 is pointing
downwards and the water fl ows over the cleaning attach-
ment.
If you want to remove and dispose of the cleaning attachment 2:
1) Remove the appliance head 1 by turning it a little so that
point on the appliance head 1 is aligned with the
symbol on the hand set 4. You can then remove the
appliance head 1.
2) Pull the cleaning attachment 2 off the attachment fi tting 3.
If it is attached too fi rmly, use the removal tool on the stor-
age box 8.
3) To do this, push the cleaning attachment 2 all the way
through the opening in the storage box 8 and move the
hand set 4 together with the appliance head 1 in the
direction of the arrow:
This will remove the cleaning attachment 2 from the
attachment fi tting 3 and it will fall off .
NZR 1.5 A1
GB │ MT │
45 ■