Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Product Description
An Electric Impact Wrench or Impactool is a hand-held, power tool that utilizes rotary impacts to tighten or loosen threaded fasteners through
specially hardened detachable sockets.
General Safety Rules
•
Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
•
It is your responsibility to make this safety information available to others that will operate this product. Failure to follow standards
and regulations can cause personal injury.
Always install, operate, inspect and maintain this product in accordance with all applicable standards and regulations (local, state,
•
country, federal, etc.). Compliance is your responsibility. Failure to follow standards and regulations can cause personal injury.
Work area
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
•
Be aware of buried, hidden or other hazards in your work environment. Do not contact or damage cords, conduits, pipes or hoses
•
that may contain electrical wires, explosive gases or harmful liquids. Electric shock, fire or personal injury may result.
Electrical Safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded)
•
power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
Power tools are for Indoor Use Only. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
•
risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp
•
edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
•
Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances.
Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician
if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding
provides a low resistance path to carry electricity away from the user.
•
Always use specified supply voltage. Incorrect voltage can cause electrical shock, fire, abnormal operation and may result in personal
injury.
Be sure all electric cords & cables are the correct size & all plugs & connectors are tightly secured. Under-sized wire and loose
•
connections can cause electrical shock, fire and may result in personal injury.
•
Ensure an accessible emergency electric power shut off has been installed, and make others aware of its location. In the event of an
accident, this shut off may minimize personal injury.
Personal Safety
•
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while tired or
under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal
injury.
•
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the
•
switch or plugging in tools that have a switch on invites accidents.
•
Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the tool in unexpected situations.
•
•
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Prevent exposure and breathing of harmful dust and particles created by power tool use.
•
-
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
-
lead from lead based paints,
-
crystalline silica from bricks and cement and other masonry products, and
-
arsenic and chromium from chemically treated lumber.
-
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
•
Stop using any tool if discomfort, tingling feeling or pain occurs. Vibration, repetitive motions or uncomfortable positions may be
harmful to your hands and arms. Power tools can vibrate in use. Seek medical advice before resuming use.
Avoid contact with moving parts of tool. Tool and/or accessories may briefly continue their motion after power is removed creating a risk
•
of entanglement or other personal injury.
•
Do not modify this tool, safety devices, or accessories. Unauthorized modifications may result in electric shock, fire or personal injury.
Do not use this tool for purposes other than those recommended. Electric shock, fire or other personal injury may result.
•
EN-1
WARNING
45550829_ed1
Publicidad
Tabla de contenido
