Product Safety Information; Product Specifications - Ingersoll Rand 212A Manual De Instrucciones

Product Safety Information

Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrenches Product Safety Information
Manual Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Power Management System
For models that include a power management system, the system allows operator reduction of
maximum output power in either the forward or the reverse direction.
For reduced power in the forward direction and full power in the reverse direction, push
the reverse valve inward on the right side of the tool and rotate the reverse valve until the notch
on the right side aligns with the desired number on the right side. This provides reduced power
in forward but full power in reverse when the reverse valve is pushed in the opposite direction.
(See TPD1248 on page 2.) For reduced power in the reverse direction and full power in the
forward direction, push the reverse valve inward on the left side of the tool and rotate the
reverse valve until the notch on the left side aligns with the desired number on the left side. This
provides full power in forward but reduced power in reverse when the reverse valve is pushed
the opposite direction. (See TPD1249 on page 2.) For full power in both directions, rotate the
Reverse Valve until the notch on each end of the Reverse Valve aligns with 5 on each side of the
housing.
The power level indicators (See TPD1248 and TPD1249) are for reference and DO NOT indicate
a specific power. The power output can be further reduced in forward or reverse by using the
variable throttle.

Product Specifications

Model(s)
212A
222A
Recommended Torque Range
Model(s)
Forward
ft-lbs (Nm)
212A 20-125(27-170)
222A 20-125(27-170)
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
45764479_ed1
Style
Type
Pistol Square
Pistol Square
Reverse
† Pressure (L
ft-lbs (Nm)
20-125(27-170)
20-125(27-170)
Қ = 2.8 m/s
Ҝ = 2.2 m/s
Drive
Size
3/8"
1/2"
Sound Level dB (A)
(ISO15744)
) ‡ Power (L
p
97.0 108.0
96.9 107.9
uncertainty
2
uncertainty
2
EN
Impacts per min.
1500
1500
Vibration Level
(ISO28927)
) m/s²
w
7.1 Қ
6.9 Ҝ
EN-1