dirna Bergstrom bycool SLIM FIT Manual Del Usuario página 7

SLIM FIT
Thank you for acquiring and trusting our products range. Slim Fit is an Air Conditioning
equipment designed and made by Dirna Bergstrom to be used with vehicle´s engine
off, during resting periods under the shade and/or at night. The only maintenance that is
required is a periodical cleaning of the condenser, at least once a year (1).
Slim Fit is designed with the most advanced technology to achieve an efficient output,
a reduction in energy expenses and CO
characteristics which make it unique on the market of Air Conditioning for vehicles.
If the temperature inside your vehicle cabin is too high for you to rest, cool down cabin
with vehicle Air Conditioning during a few minutes, then connect Slim Fit to maintain
comfort temperature.
If you have any doubt, please consult your dealer or directly Dirna Bergstrom
Do not forget to ask your dealer for your warranty card.
!
(1) To carry out this operation, it is necessary to dismantle upper plastic cover of equipment (9
sheet thread screws) and blow using compressed air. We advise this operation should be carried
out by a Service authorised by Dirna Bergstrom
NOTE:
If, during assembly, the unit becomes slanted or
the cabin drops with the unit mounted, wait for
at least 60 minutes from the moment the unit is
horizontal before starting up.
Air conditioning for vehicles
emissions to the atmosphere. These are the
2
7
EN