Care & Maintenance - Starfit ECOCOPPER Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: Never use metal utensils such as forks, knives with this product, as they will scratch
the non-stick surface. Only use plastic, rubber, wooden, or silicone cooking utensils
1.
Place the product on a flat, stable, heat-resistant surface.
2.
Plug the power cord into a standard 120-volt AC electrical outlet.
3.
Set the temperature control dial to ''MAX'' to preheat the appliance. Power Light (red)
will illuminate, indicating the product is heating.
NOTE: The ready-to-Cook Light (green) cycles on and off indicating the unit is
preheating.
4.
The Ready-to-cook light indicator (green) will illuminate, indicating the appliance has
reached the selected temperature.
5.
Open the cover and pour approximately 3/4 cup waffle batter onto the bottom plate
and close the cover. For best results, pour batter in a circle around the outer edge.
NOTE: Batter will expand rapidly inside the appliance; DO NOT lock the cover during
the cooking process. Do not over-fill as the batter will seep out over the edge.
NOTE: Do not open the cover while steam is escaping. Cooking time may vary
depending on the type of batter used and the desired level of browning.
6.
When steam has stopped escaping, it is an indication that waffle is cooked. You may
cook for a longer period of time to achieve the desired crispiness. When waffle is done
use silicone utensils to remove from the grids.
NOTE: The ready-to-cook light (green) may cycle on and off during cooking. This
is normal and it indicates that the thermostat is maintaining the unit at the proper
cooking temperature.
7.
Close the cover and wait for ready-to-cook light (green) to illuminate again before
preparing another batch of waffles.
CARE & MAINTENANCE
WARNING: Ensure the appliance is unplugged from the electrical outlet and allow it to
completely cool down before handling or cleaning.
WARNING: Do not pour cold water on the product, as the sudden temperature change
may damage the product or create a burn hazard.
1.
Wipe the cooking plates with a damp sponge or cloth.
WARNING: Do not run water directly onto the cooking surface. Do not immerse the
appliance or power cord in water or any other liquids or place in the dishwasher.
2.
Wipe the cover and the outside surface with a soft, damp cloth and dry thoroughly.
NOTE: Do not use bleach or abrasive cleansers/scouring pads to clean the plates, as it
may damage the non-stick finish and /or exteriors surfaces.
3.
Use the locking latch on the cover to securely close the cover and store the unit in
upright position.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido