Standard Accessories; Battery Removal/Installation - Hitachi Koki DS 14DMR Instrucciones De Manejo

English
CHARGER
Model UC14YFA / UC24YFA UC18YRL / UC18YFL
7.2 – 14.4 /
Charging voltage
7.2 – 24 V
Weight

STANDARD ACCESSORIES

1 Plus driver bit (No. 2 × 65L) ...... 1
2 Charger
DS14DMR
(UC14YFA or UC18YRL or UC18YFL) ... 1
3 Plastic case ....................................... 1
1 Plus driver bit (No. 2 × 65L) ...... 1
2 Charger
(UC24YFA or UC18YRL or UC18YFL) ... 1
DS18DMR
3 Side handle ...................................... 1
4 Plastic case ....................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (EB14B, EB1424, EB1426H, EB1430H,
EB1433X) (For DS14DMR)
2. Battery (EB1820L, EB1824L, EB1826HL, EB1830HL,
EB1833X) (For DS18DMR)
Optional accessories are subject to change without notice.
APPLICATIONS
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals
Drilling of various woods
9
7.2 – 18 V
0.6 kg 0.7 kg

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch (2
pcs.) to remove the battery (see Figs. 1 and 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When the power cord is connected, the charger's
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in Fig. 3.
CAUTION:
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.