Acqua Brevetti MiniDOS Manual De Instrucciones página 26

B1.5 Hydraulic checks after installation
After opening the water upstream of the equipment check for leaks;
1) Check for the correct installation of the pump in order to facilitate ordinary maintenance operations.
2) Verify the presence of a by-pass circuit that permits the exclusion of the pump and the presence of sampling
faucets upstream and downstream of the pump.
3) Check the correspondence of the system to any rules or recommendations issued by the competent local area
offices.
4) Check periodically that AcquaSIL 20/40
decrease proportionally with water treated). If this is not the case, please contact Acqua Brevetti S.r.l.
(telephone: +39.(0)49.8973432 e-mail info@acquabrevetti.it).
B1.6 Allowed installation schemes
Perform the installation according to one of the following schemes. Follow the entrance and exit rows stamped on
the back side of the water meter box. Any other configuration may lead to the non proper working of the device. Do
not overtighten the junctions. The manufacturer discharge himself from any responsibilities caused to people or things
in case the schemes of the manual are not respected. MiniDOS (code PM009) dosing pump is located in the package
with the Dima connection disassembled
connection. The packaging includes: N°1 Dima turning connection assembly, N°1 o-ring seal for the connection, N°2
white sealing.
1. Insert the sealing in
the dedicated site
MAN 127
MINIDOS - ENGLISH
®
is regularly consumed (the amount of product inside the tank has to
.
Before the installation of the pump it is necessary to assemble the
2. Place the T turning
connection on the pump
Pay attention to the
counterpart teeth Keep
the T connection
PLUMB LINE in respect
to the pump, even while
screwing the ring nut
3. Push the connection and
screw it lightly, clockwise
4. Manually fix it
ATTENTION!: even
when the Dima
connection is turned the
entrance will be from
the backside!
PAG.E-10