Publicidad
Idiomas disponibles
Idiomas disponibles
Reverse door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something
solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove hinge cover and then unscrew hinge bracket.
2. Remove the top left screw cover.
3. Move the core cover from left side to right side. And then lift the
upper door and place it on a padded surface to prevent it from
scratching.
4. Unscrew bottom hinge of freezer door. Then remove the door and
place it on a soft pad to avoid scratch.
11
Publicidad
