Power Dynamics 179.114 Manual De Usuario página 4

DUAL CHANNEL RECEIVER FEATURES
1. Power Button: Turns the receiver ON/OFF.
2. Power On Indicator: This light on when the receiver is plugged into and electrical outlet
and switch is pushed, it indicates that the receiver is on.
3. Channel A.B Volume Control: Rotate the knob to increase or decrease the volume of the
receiver output.
4. Channel A.B Down Function Button: Sets channel data.
5. Channel A.B Up Function Button: Sets channel data.
6. Channel A.B LCD Information Display: show system frequency/RF signal strength
AF audio level strength ect.
7. Antennas: Supply the RF for receiver.
8. Antenna Input Connectors: Using supplied telescopic antenna or other antenna system.
9. XLR Output Connector: Plug and XLR audio cable from this connector to the input to your
mixer.
10. Squelch Control: Adjust squelch control setting to emphasize either signal quality or
system range. This control is factory pre-set, and normally does not need further
adjustment. Refer to Receiver Squelch adjustment section for more information.
11. Phone Jack Audio Output Connector(Unbalanced high Z): An unbalanced audio cable with
114" phone plug(such as standard guitar cable) can be used between this connector and
your amplifier input.
12. Power Input Connector: Connect the AC adapter to this jack and then plug into an AC
electrical outlet. (Please use supplied AC adapter)