VBM SUPER 2B Manual De Instrucciones página 57

3.3,
POSITIONING THE MACHINE.
Place the machine in its final location, making sure that:
· the movable support is sufficiently strong and stable, taking into account the weight of the
machine, and that is not tilted;
· there are at least 10 cm. between the wall and rear and side walls of the machine and any
walls, to allow proper ventilation;
· the upper floor of the machine (holding surface) should not exceed 150 cm from the floor;
· when used with a direct connection to the water supply, check that you are very close to
the connection points.
15