TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage in Volts (V).
3. Working frequency in Hertz (Hz).
4. Absorbed current in Amperes (A). Ensure that the power
supply to which the tool is connected can easily tolerate the
indicated current as a minimum.
5. Absorbed power expressed in Watts (W).
6. Tool code or serial number.
7. Technical data of the tool.
8. Maximum rpm
9. The double square indicates that the tool is doubly insulated
and therefore does not require earthing through the power
supply cable.
10.
Read all these instructions before operating this product
and save these instructions.
11.
Personal safety devices.
12.
At the end of its useful life, the product, pursuant to
European Directive 2002/96/CE and its implementation in
national law, must not be released into the environment or
thrown away as domestic waste, but must be disposed of at
authorised recycling centres (contact the relevant local
authorities for a list of places where the product may be
disposed of according to the law).Disposing of the product
correctly contributes to protecting human health and
safeguarding the environment. Any illegitimate disposal of the
product will be punishable by law.
10
MILANO - ITALY
1
2
7
3
12
9
11
6
4
5
8
CONFORMITY DECLARATION
Year of affixing to the
mark: 96
We declare on our responsibility that the represented hand-held
electric motor operated tool, in protection class II, is in
conformity with the Essential Requirements of Safety of the
following Directives:
73/23/CEE Low Tension + 93/68/CEE
89/336/CEE Electromagnetic Compatibility + 91/263/CEE +
92/31/CEE + 93/68/CEE
The tests have been carried out in accordance with the European Har-
monised Regulations in force
Low Tension:
EN 60745-1
Safety of hand-held electric motor operated tools
EN 50144-2-3 Particular requirements for grinders, polishers
and disc sanders
EN ISO 3744 + UNI EN ISO 11203
propagated noise
UNI EN 28662
+ UNI EN ISO 5349
on the handle
Electromagnetic compatibility:
EN 55014 -1 + EN 55014-2; EN 61000-3-2 + EN61000-3-3
Electromagnetic fields:
EN 50366
Tests and limits relative to
Measuring of the vibrations
S.p.A
IL PRESIDENTE
G. Valentini
11