Conformity Declaration - Rupes AR11N Instrucciones De Uso

TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1. Type of tool.
2. Nominal working voltage in Volts (V).
3. Working frequency in Hertz (Hz).
4. Absorbed current in Amperes (A). Ensure that the power supply to
which the tool is connected can easily tolerate the indicated
current as a minimum.
5. Absorbed power expressed in Watts (W).
6. Tool code or serial number.
7. Technical data of the tool.
8. Maximum rpm
9. The double square indicates that the tool is doubly insulated and
therefore does not require earthing through the power supply
cable.
10. Read all these instructions before operating this product and
save these instructions.
11. Personal safety devices.
12. At the end of its useful life, the product, pursuant to European
Directive 2002/96/CE
implementation in national law, must not be released into the
environment or thrown away as domestic waste, but must be
disposed of at authorised recycling centres (contact the relevant
local authorities for a list of places where the product may be
disposed of according to the law).Disposing of the product
correctly contributes to protecting human health and
safeguarding the environment. Any illegitimate disposal of the
product will be punishable by law.
(RAEE) + 2003/108/CE

CONFORMITY DECLARATION

Year of affixing to the
We declare on our responsibility that the represented hand-held
electric motor operated tool, in protection class II, is in conformity
with the Essential Requirements of Safety of the following Directives:
998/37/CE Machinery
2006/95/CE Low Tension
2004/108/CE Electromagnetic Compatibility
The tests have been carried out in accordance with the European
Harmonised Regulations in force
Low Tension:
EN 60745-1 Safety of hand-held electric motor operated tools
EN 60745-2-3 Particular requirements for grinders, polishers and
disc sanders
EN ISO 3744 + UNI EN ISO 11203 Tests and limits relative to
propagated noise
UNI EN 28662 + UNI EN ISO 5349 Measuring of the vibrations on
the handle
and its
Electromagnetic compatibility:
EN 55014 -1 + EN 55014-2; EN 61000-3-2 + EN61000-3-3
Electromagnetic fields:
EN 50366
mark: 96
IL PRESIDENTE
G. Valentini
S.p.A
11