Adf (Automatic Document Feeder) - Olivetti COPIA 9020 Instrucciones De Uso

SELECTING THE MODE: SORT AND STAPLE
Sort/Staple mode sorts the copies in progressive order (the copy of each original is delivered to a
different bin) and staples the copies.
The copies of each original are stapled/delivered to the same bin.
POSITION OF ORIGINALS DIAGRAM
Copying procedure:
1. Press the SORT/GROUP/STAPLE-SORT key (A-4) until the indicator
(only with ADF installed)
2. Set the number of copies required using the NUMERICAL keys (A-31).
- If you set more than 10 copies, the copier automatically changes it to 10 and then makes 10 copies.
3. Press the PRINT key (A-30). When copying finishes, the copies in each bin are stapled.
Notes
- The MANUAL STAPLER key flashes (green) when a jam occurs in the stapler.
To remove the jammed paper, follow the instructions described in "Removing jammed staples".
- The NO STAPLES INDICATOR flashes (red) when the staples run out.
To add more staples, following the instructions described in "ADDING STAPLES".
4. If the original is placed on the copyboard glass, press the MANUAL STAPLER key when copying
terminates.
(If the manual stapler key does not light up, the copies cannot be stapled).
24
chap1.p65
Copyboard glass
Make sure that the original is placed with the corner to be stapled
on the upper right handle side.
ADF
Make sure that the original is placed with the corner to be stapled
on the top left hand side of the ADF.
24
lights up.
01/02/00, 10.42