Operation - Drive Harmony 14200 Manual De Instrucciones

4. Operation

NOTE: Always read the operating instructions before use.
4.1 GENERAL OPERATION
Static
Statique
Alternate
Alterné
Pulsation
Pulsation
Seat Inflation
Gonflage Du Siège
4.2 CPR
Harmony True Low Air Loss Tri-Therapy Mattress Replacement System
Système de remplacement de matelas d'air réelle à basse pression trois thérapies
lb lb Item / Article #14200
100 lb 200 lb 300 lb 400 lb
45 Kg 90 Kg 136 Kg 181 Kg
AutoFirm
Fermeté
Low Pressure
Pression Faible
Automatique
Power Failure
Perte D'alimentation
System Failure
Soutien Technique
1. Switch on the main power switch found
on the left side of the Control Unit while
facing the User. Press (
panel to turn on the power.
2. The system will automatically go into "Auto
Firm" mode for a few minutes of inflation.
3. When the initial inflation (Auto Firm pro-
cess) is completed, the system will auto-
matically enter into Static mode
4. Using the Comfort Weight Setting buttons,
adjust according to the weight and height
of the patient, adjust the pressure setting
to the most suitable level without bottom-
ing out.
5. Using the Therapy Mode button choose the
desired therapeutic mode.
NOTE: Seat inflate mode should be used for
ingress and egress at all times to prevent bot-
toming out.
When CPR needs to be performed, click on
the release button on Quick Connector and
quickly detach the connector from the system
to release air.
12
) on the control