Check the CINCH and AV connec-
tions on the connected devices as
well as on the transmitter q and the
receiver d.
If you are using other radio devices
(same frequency), this may result in
disruptions. It may also affect the
range of the radio transmission set.
The signal source must be switched
on (i.e. DVD player) and playback
started.
Poor transmission quality
Change the direction of the transmit-
ter q and the receiver d.
Change the channel setting s/l
on both components. Make sure that
the transmitter q and the receiver d
have the same setting.
If you are using other radio devices
(same frequency), this may result in
disruptions. It may also affect the
range of the radio transmission set.
Disruptions in remote control
commands
Point your remote control directly at
the infrared receiver f. Otherwise
the commands cannot be executed.
Fasten the infrared transmission di-
odes of the infrared cable 2# slightly
offset to the infrared receiver of the
signal source.
If you are using other radio devices
(same frequency), this may result in
disruptions. It may also affect the
range of the radio transmission set.
Disposal
Do not dispose of the device
in your normal domestic
waste. This product is subject
to the provisions of European
Directive 2002/96/EC.
•
Arrange for the product, or parts of it,
to be disposed of by a professional dis-
posal company or by your communal
waste facility.
•
Observe the currently applicable re-
gulations. In case of doubt, please
contact your waste disposal centre.
Dispose of packaging materials
in an environmentally responsible
manner.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
- 46 -