Mounting The Loop Handle - Stihl FC 83 Manual De Instrucciones

english / USA
1
:
Always walk forwards when cutting,
do not pull the unit towards you.
:
Cut at a steady pace to avoid having
to make several passes.
1 = Gunning sight for cutting blade.
14

Mounting the Loop Handle

2
3
A
:
Fit the loop handle (1) on the drive
tube 8" / 20 cm (A) forward of the
control handle (2)
:
Position the clamp (3) against the
drive tube and slide it into the loop
handle.
1
:
Fit square nut (4) in the loop handle,
insert the clamp screw (5) from the
other side and tighten down
securely.
Adjusting loop handle to most
comfortable position:
: Release clamp screw (5).
:
Move the loop handle along the
drive tube as required - retighten the
clamp screw.
4
5
50 mm
( 2" )
FC 83