Brita On Tap Instrucciones De Uso página 5

On the left side of the BRITA On Tap water fi lter system
there is a battery slot, which can be opened with a coin.
Before fi rst use, please remove the sticker from the
battery and place the battery back into the battery slot.
Press the reset button and the display countdown will
start to work.
The BRITA On Tap comes with 5 different adapters
Choose the correct adapter for your tap (A / B/ C)
adapter onto the water fi lter body and turn it about half a turn, attaching it loosely to the water fi lter body.
system fi rmly against the tap and tighten the screws of the adapter evenly.
fi lter body - the installation is complete.
showered unfi ltered water i.e. to rinse vegetables.
drinking, washing fruit and vegetables and for cooking.
•
Remove the attachment nut from the water fi lter body.
Screw the adapter onto the tap through the attachment
nut. Tighten the attachment nut securely to the water
fi lter body - the installation is completed.
•
Open the housing by rotating the cap anticlockwise.
Insert the new fi lter cartridge and close the system by
rotating the cap clockwise until it locks.
C
Remove the attachment nut from the water fi lter body.
and you get
i.e. for washing hands or fi lling large water containers.
cartridge may still contain material residue. This is
harmless to health and does not affect the perfor-
mance of your water fi lter. Run water through the fi lter
for 1 to 2 minutes to remove any residue. Please
repeat this process with every new fi lter cartridge. You
may use this water for your plants or it can be
discarded. If the BRITA On Tap has not been used for
to be used for more than 24 hours, allow water to pass for 30 to 60
seconds before using the fi ltered water.
4
Tighten the attachment nut securely to the water
for unfi ltered water in a straight beam
If the BRITA On Tap is new, the fi lter
Place the type C
Push the water fi lter