GBC MultiBind 420 Manual De Instrucciones página 5

Your MultiBind 420 offers the following capabilities:
Punching Paper (80gsm)
Punching PVC Plastic Foils (0.2mm)
Max. Binding Element Capacity
Approx. Binding Capacity (80gsm)
Setting up
• Place the unit on a stable surface.
• Fold up the document stand (cover) (Fig 1).
• Push the two transport locks of the transport guard inwards
(Fig 1.2).
• Move the punch handle upwards until the limit stop (Fig 1.3).
• Move the binding lever upwards until the limit stop. A spring
in the unit presses the binding lever a few centimetres to the
side so that you can use this easily (Fig 2).
Your MultiBind 420 is now ready for use.
Warranty
ACCO Brands Europe (ACCO) warrants its products and their
parts against defects in materials and workmanship under
normal use for a period of 24 months from the original date of
purchase.
During this period we will repair or replace a defective product
or part subject to the following warranty conditions:
The warranty applies only to defects in materials and
workmanship under normal use and does not extend to
damage to the Product or parts which result from:-
- alteration, repair, modification or service carried out by
anyone other than an authorised ACCO service centre.
- accident, neglect, abuse or misuse owing to failure to comply
with the normal operating procedures for a product of this
type.
Register this product online at www.accobrands.com
GBC MultiBind 420
20 sheets Comb
12 sheets Wire/Click
Max. 2 PVC Foils
51mm CombBind
14mm WireBind
16mm ClickBind
450 Sheets CombBind
125 Sheets WireBind
145 Sheets ClickBind
Transporting or storing the unit
Locking the unit
1
• Press the binder lever towards the unit and fold this
downwards (Fig 17.1).
• Push down the punching lever (Fig 17.2).
• Push the two latches outwards to lock the punching
lever (Fig 17.3). Make sure that the punch handle can no
longer be moved.
• Fold down the document stand (Fig 17.4).
Transporting or storing the unit
2
You can now use the punch handle as a carrying handle.
This lets you transport the unit easily and it can now be
stored either in an upright position or lying down (Fig 20).
m
Warning: Danger of injury! Before transporting
the unit, always make sure that the punching
lever has been correctly locked.
Emptying the clippings tray
Lock the unit (Fig 18).
1
Place the unit in an upright position and fold out the tray on
2
the underside of the unit and empty it (Fig 18).
Replace the tray until the spring locks into place (Fig 19).
3
Depending on the diagnostics and the model type, we will
either arrange a service call by an engineer or arrange with you
return of the product to ACCO. ACCO will, at its discretion, in
accordance with law, either
- repair the shredder using either new or refurbished parts, or
- replace the shredder with a new or refurbished shredder that
is equivalent to the shredder being replaced.
Nothing in this Warranty shall have the effect of excluding the
liability of ACCO in respect of death and personal injury caused
by the negligence of ACCO. This Warranty is offered (subject to
these terms and conditions) in addition to, and does not affect,
your statutory rights.
If you experience a technical fault, please contact the ACCO
customer helpdesk (see back cover).
G
5