Function Instruction - KREA HM130 Manual De Instrucciones

 If the appliance should become wet or damp, remove plug from
mains socket immediately. Do not put your hands in the water!
 Use this appliance only for its intended purpose.
 Never touch the rotating tools while still in motion; always wait
for them to stop.
 To avoid splashes, always put the dough hooks or beater right
into the material to be mixed before running.
 Never use this appliance to mix or stir anything other than
foods.
 Do not use during cooking processes or with boiling liquids.
PREPARING THE DOUGH HOOKS OR BEATERS
Always check the mixer is switched off at the mains.
ASSEMBLING THE BEATERS AND DOUGH HOOKS
Make sure that the on/off and speed control is in "0" position so that the appliance is
switched off and also make sure that the appliance is unplugged.
Beaters/Hooks: Insert the beaters or hooks under the body of the mixer and turn slightly until
you hear a clicking sound. Pull gently at the accessories to check if they have been properly
mounted.
Press the ejection button on top of the mixer to release the accessories.
ASSEMBLING THE MIXER ON THE BASE AND BOWL
Make sure that the appliance is switched off and unplugged from the power supply.
You have to assemble the beaters/dough hooks before starting the appliance.
Beaters/dough hooks: put either the beaters (10) or the dough hooks (11) into the propulsion
openings and turn them slightly until they click into place. Pull gently at the accessories to
check if they have been properly mounted.
Put the arm of the base in horizontal position and slot the appliance into it. By pushing on the
back of the appliance, the appliance can be fixed tightly onto the arm of the base.
The bowl turns automatically.
Unplug the appliance when you want to disassemble the appliance from the base.
You can take the appliance from the base by pressing the release button (5) and tilting the
appliance slightly.

FUNCTION INSTRUCTION

The Mixer is designed for: