9. GENERAL MAINTENANCE
Auto Ribbon Saving Mode
Auto ribbon saving function is activated when a no print area extends more than 17 mm.
For further information on this function, please ask your nearest TOSHIBA TEC service representative.
NOTE:
According to the relation between the outer diameter of rewound ribbon and print speed, ribbon
loss per saving varies as follows:
Print speed
Ribbon loss
3"/sec.
Approx. 5 mm
5"/sec.
Approx. 8 mm
8"/sec.
Approx. 17 mm
E9-5
ENGLISH VERSION EO1-33007
9.4 Threshold Setting