Maintenance & Care; Environmental Protection - Stanley 0-77-445 Manual De Instrucciones

77-445 MetalSensor GB_V!.qxd
SPECIFICATIONS
Utilizing the procedure of scanning and marking from two sides,
Stanley®MetalSensor will find the object centre with an accuracy
of ± 7mm (±.28"). When performing sensing operations, it is
Recommended that the Stanley®MetalSensor to be used at 20-35%
relative humidity.
Battery:
Shock Resistance:
Depth Accuracy:
Centre Accuracy:
Operating Temperature:
Storage Temperature:
AC Detection:
MAINTENANCE & CARE
The Stanley®MetalSensor is not waterproof. Do not allow the unit
to get wet. Damage to internal circuits will result. Do not leave the
Stanley®MetalSensor out in direct sunlight or expose it to high
temperatures. The housing and some internal parts are made of
plastic and may become deformed at high temperatures. Do not
store the Stanley®MetalSensor in a cold environment. Moisture
will form on interior parts when warming up. The moisture could
cause corrosion of internal circuit boards. When working in dusty
locations, some dirt will collect on the LCD and unit. Remove any
moisture or dirt with a soft, damp cloth. Do not use aggressive
cleaning agents or solvents. Stanley®MetalSensor in its case when
not in use. Remove batteries before storage.

ENVIRONMENTAL PROTECTION

Sort the product, packaging and accessories for environmentally
friendly recycling when disposing of them.
Dispose of used batteries in an environmentally friendly way in
accordance with local regulations. Do not throw batteries in the fire
or in the household waste
8 • MetalSensor
(1) 9 volt (6LR61) (not included)
Up to 91cm (3')
+/-7mm (0.28") (Ferrous objects)
+/-10mm (0.39") (Copper Pipes
+/-7mm (0.28") (Metal objects only)
0°C to 40°C (32°F to 104°F)
-29°C to 60°C (-20°F to 140°F)
Up to 50mm (1.9")
1/8/07 5:38 PM