Mounting And Removing The Carrier Plate; Mounting The Carrier Plate; Removing The Carrier Plate - Stihl RMI 632 P Manual De Instrucciones

English
2
► Mount the new mowing blade (2) as depicted above. The
retainers (3) must fit into the holes in the mowing blade.
► Turn the fastening nut (4) clockwise until you hear several
audible clicks.
► Confirm that you have mounted a new mowing blade in the
"Service" menu, @ 15.5.

20.4 Mounting and Removing the Carrier Plate

20.4.1 Mounting the Carrier Plate

WARNING
To reduce the risk of personal injury from thrown or flung
objects, do not mount a worn, broken or damaged carrier
plate.
66
3
3
3
3
4
WARNING
To reduce the risk of laceration injuries, always wear heavy-
duty work gloves when mounting or otherwise handling the
carrier plate, @ 5.3.
To mount the carrier plate:
► Tilt the robotic mower onto its side and lean it securely
against a wall.
► Clean the mowing deck with a brush or a slightly
dampened cloth.
1
► Clean the blade shaft (2) and the mounting on the carrier
plate (1) with a brush or a slightly dampened cloth.
► Push the carrier plate onto the blade shaft.
NOTICE
Never use a hose or pressure washer to clean the robotic
mower, or otherwise spray it with water or other liquids.
Doing so could lead to permanent damage.

20.4.2 Removing the Carrier Plate

WARNING
To reduce the risk of laceration injuries, always wear heavy-
duty work gloves when mounting or otherwise handling the
carrier plate, @ 5.3.
20 Inspection and Maintenance
2
0478-131-3046-A