English
21.2 Robotic Mower
Always activate the disabling device before carrying out any inspection, cleaning or maintenance.
Condition
The robotic mower operates at
the wrong times.
The robotic mower fails to
operate during an active time.
The robotic mower fails to mow
after the commands "Start
mowing" or "Start timedelayed
mowing" have been called up.
74
Possible Cause
Date and time incorrectly set.
Active times incorrectly set.
Robotic mower has been
operated by unauthorised
persons.
Battery is charging.
Automatic mowing switched off.
Active time switched off.
Rain detected.
Weekly mowing duration has
been reached, no further mowing
operations required that week.
Message is active.
Control panel / manual controller
not correctly inserted.
– Docking station not connected
to power supply.
– Robotic mower too hot / too
cold.
– Power failure.
Insufficient battery charge.
Rain detected.
Control panel / manual controller
not correctly inserted.
Message is active.
Remedy
► Set the time and date, @ 15.2.
► Set the active times, @ 14.6.
► Set the safety level to "Medium" or "High", @ 15.4.
► Allow the battery to finish charging, @ 12.4.
► Switch on automatic mowing, @ 15.
► Release the active time, @ 14.6.
► Set the rain sensor, @ 15.2.
► No further action necessary, mowing operations are
automatically distributed over the week – if
necessary, start the mowing operation with the
"Mowing" command, @ 14.3.
► Rectify displayed fault and confirm the message by
pressing the OK button.
► Insert the control panel / manual controller, @ 16.4.
► Check the power supply to the docking station,
@ 10.3.
► Allow the robotic mower to warm up or cool down
gradually at ambient temperatures of about 50 °F to
68 °F (10 °C to 20 °C).
► Check the power supply.
► Charge the battery, @ 12.4.
► Set the rain sensor, @ 15.2.
► Insert the control panel / manual controller, @ 16.4.
► Rectify displayed fault and confirm the message by
pressing the OK button.
21 Troubleshooting Guide
0478-131-3046-A