Assembly Of Pressure Washer - Ducati DPW 2100 Manual De Usuario

English
Owner´s manual

13. ASSEMBLY OF PRESSURE WASHER

Recommended process
1. Connect the high pressure hose to the gun pull out the high pressure hose.
2. Unfold the high pressure hose.
3. Connect the high pressure hose to the water outlet tube.
4. Connect the water inlet tube to the quick connector.
5. Connect the water inlet tube to the water tap.
6. Connect the gun lance to the gun handle, pull the spray nozzle to the low-pressure state and
turn on the water tap plug on the electric power supply, turn on the machine, change to high
pressure state (if necessary). Normal use.
NOTE: water inlet hose connect to tap through quick connector 4029 (optional) which could be purchased from
local dealer if needed.
38