Ducati DPW 2100 Manual De Usuario página 40

English
Owner´s manual
Problem
Appliance
noisy
Oil leakage
TSS versions
only
TSS versions
only: applian-
ce works
intermittently
No water out
when trig-ger-
ing the gun
No detergent
taken in
NOTE: If the motor has started but fails to restart during work, wait for 2-3 minutes (overload cutout has been
tripped) before repeating the switch on. If the problem occurs again, please contact the nearest Authorized Service
Centre
40
Probable Cause
Water too hot
Seals worn
Nozzle clogged
High pressure system or pump
hydraulic circuit not watertight
Safety valve soften or nozzle
clogged
Nozzle clogged
Adjustable nozzle on high pres-
sure setting
Detergent too dense
High pressure hose extension
being used
Deposits or restriction in deter-
gent circuit
Solution
Reduce temperature (see technical data)
Contact your nearest Authorized Service
Centre
Clean nozzle
Contact your nearest Authorized Service
Centre
Clean the nozzle or contact your nearest Autho-
rized Service Centre
Clean nozzle
Set nozzle on setting
Dilute with water
Fit original hose
Flush with clean water and eliminate any
restrictions. If the problem persists, contact
an Authorized Service Centre