Instructions For Use; Placement Tool; Assembly; Illustrated Description - stayer TV509 Manual De Instrucciones

Check the cable regularly and have a damaged cable
repaired only through an authorised customer service
agent for STAYER power tools. Replace damaged
extension cables. This will ensure that the safety of the
power tool is maintained.
Store the machine in a safe manner when not being
used. The storage location must be dry and lockable.
This prevents the machine from storage damage, and from
being operated by untrained persons.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Never leave the machine before it has come to a
complete stop. Cutting tools that are still running can
cause injuries.
Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables
increase the risk of an electric shock.
Keep hands away from the cutting area while
the machine is running. Danger of injury when
coming into contact with the cutting disc.
Wear ear protectors. Exposure to noise can cause
hearing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.

3.Instructions for use

3.1 Placement Tool

Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.

3.2 Assembly

Avoid unintentional starting of the machine.
During assembly and for all work on the machine,
the power plug must not be connected to the
mains supply.
Carefully remove all parts included in the delivery from their
packaging. Remove all packaging material from the
machine and the accessories provided.
Before starting the operation of the machine for the first
time, check if all parts listed below have been supplied:
– Cut-off grinder with mounted cutting disc
– Ring spanner
Check the power tool for possible damage.
Before further use of the machine, check that all
protective devices are fully functional.
ENGLISH
21
Any lightly damaged parts must be carefully checked to
ensure flawless operation of the tool. All parts must be
properly mounted and all conditions fulfilled that ensure
faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service centre.
Stationary or Flexible Mounting
To ensure safe handling, the machine must be mounted on
a level and stable surface (e. g., workbench) prior to using.
Stationary mounting (see figure A)
– Fasten the power tool with suitable screw fasteners to the
working surface. The mounting holes 11 serve for this
purpose.
Flexible Mounting (not recommended!)
In the exceptional case that it should not be possible to
firmly bench-mount the power tool, you can provisionally
place the legs of base plate 12 on a suitable surface (e. g. a
workbench, level floor, etc.) without bolting the machine
down.

3.3 Illustrated description

1 Lock-off button for On/Off switch
2 On/Off switch
3 Handle
4 Retracting blade guard
5 Spindle lock
6 Cutting disc
7 Top of workpiece support
8 Clamping spindle
9 Quick-release button
10 Spindle handle
11 Mounting holes
12 Based machine bed
13 Locking screw for angle stop
14 Ring spanner (15 mm; 13 mm)
15 Transport safety-lock
16 Depth stop cutting
17 Tool arm
18 Transport handle
19 Carter disk
20 Spark guard
21 Tool spindle
22 Clamping flange
23 Washer
24 Bolt
25 Lock nut of the depth stop
26 Arrow disc guide
27 T humbscrew
28 Protective Cover Flangia
*
Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.

4. Operating instructions

4.1 Placement and testing

Observe correct mains voltage! The voltage of the
21
*
*